Oil Pump Systems
-
LUBE CORP Oil Pump AMZ-III
LUBE CORP Oil Pump AMZ-III. A lightweight and compact pump unit without controller. Conforming to European Safety Standard. Oil level and pressure switches are standard equipment. This pump unit requires a separate control circuit to operate.
Specifications
Pump Discharge volume: 90ml/min (50Hz), 110ml/min (60Hz)
Discharge pressure: 1.5MPa (safety valve set pressure)
Motor Voltage / current: AC100Vf1/1.5A, AC200Vf1/0.8A (50Hz)
AC100Vf1/1.3A, AC200Vf1/0.7A (60Hz)
Output: 19W (50Hz), 18W (60Hz) Shading motor
Abnormality detection Oil level pressure
Oil level switch
Contact type: A Contact (NO) ON at low level
Contact capacity: 0.5A, AC DC200V/30W smaller
Pressure switch
Contact type: A Contact (NO)
Operating pressure: 1.3M ON
Reset pressure: 0.9MPa OFF
Contact capacity: AC DC250V/2A
Operation rating: MAX. discharge time:1 min.
Min.interval time:3 min.
Working viscosity: range 50~1300mm2/S (50Hz)
Reservoir capacity: 1.8l,3l (plastic) 3l,4l,8l (sheet metal)
Weight ~ 1.8l: 2.7kg 3l: 3.6kg
External fuse: 100V/2.0A, 200V/1.0A
-
LUBE CORP OIL PUMP AMO-II-150S
LUBE CORP OIL PUMP AMO-II-150S. The AMO-II-150S automatic interval pump is a part of AMO series Positive Displacement Injector (PDI) system of lubricating pumps. It is capable of pumping up to 180 cc/min at pressures up to 284 psi. This automatic interval pump is suitable for pumping a wide range of oil viscosities at an economical price. It comes attached to a 1.8 liter or 3 liter reservoir.
Specifications
Discharge Volume 150cc/min(50Hz), 180cc/min(60Hz)
Discharge Pressure 2.0MPa(20kgf/cm²) 284psi
Power AC100V/1 ph., AC200V/1 ph (50/60Hz)
AC110V/1 ph., AC220V/1 ph (50/60Hz)
Rated Current AC100V/0.83A, AC200V/0.41A (50Hz)
AC100V/0.64A, AC200V/0.33A (60Hz)
Motor 20W (50/60Hz), Condenser motor
With controller
Discharge 2~90sec
Interval 1~10minutets, 2~30min, 10~120min
Emergency detection Pressure, Oil level
Pressure switch
Operating pressure : 1.3Mpa(13kgf/cm2)184.6psi
Reset pressure : 0.9Mpa(9kgf/cm2)127.8psi
Emergency output
contact type A contact (N.O)
Emergency output
contact capacity 0.5A/AC100V, 0.2A/AC200V
Without controller
Emergency output
contact type Oil level switch A contact (ON at low level)
Pressure switch A contact (Pressure up ON)
Emergency output
contact capacity Oil level switch: 0.5A, AC?DC200V/30W
Pressure switch: 2A, AC?DC250V
Reservoir capacity 1.8l, 3l: Resin
3l, 4l, 8l: Metal
Weight 1.8l: 3.3kg/7.3lbs, 3l: 4kg/8.8lbs
-
LUBE CORP OIL PUMP MMXL-IIII
LUBE CORP OIL PUMP MMXL-IIII. Automatic intermitten piston pump MMXL-III. A Low Cost and Compact Solution for Small Machines. Incorporating an energy-saving motor, economical and realizing intermittent lubrication by simply turning the power ON. Automatic intermittent pump incorporating a small motor,hence an economical model. Widely used for small machines in many industries.
Specifications
Pump Discharge volume: 0.2~1.0ml/stroke
1.5~2.5ml/stroke
2.5~5.5ml/stroke
Discharge pressure 0.3MPa
Motor Power AC100V 1/50mA, AC200V 1/25mA (50Mz)
AC100V 1/42mA, AC200V 1/18mA (60Mz)
Output 3W Synchronous Motor
Emergency detection Continous
Oil level switch Contact type A Contact (NO) ON at low level
Contact capacity 0.5A, AC DC200V/30W smaller
Operation rating Continuous
Working viscosity range 30~1300mm2/S
Reservoir capacity 0.8l, 3l (plastic) 3l, 4l, 8l (sheet metal)
Weight 1.8kg (With 1.8l Reservoirs)
Protection class IP54 (CE Approved type)